全てのHL-2000ﾓﾃﾞﾙには､光源を冷却して安定させる為の統合ﾌｧﾝと､光を調整する為のﾌｨﾙﾀｰを収容する内蔵ﾎﾙﾀﾞｰが備えています｡一部のﾓﾃﾞﾙには､統合されたｼｬｯﾀｰと長寿命の電球があります｡ﾕﾆﾊﾞｰｻﾙ電源により､設定が迅速かつ簡単になります｡
標準ﾓﾃﾞﾙと強化ﾓﾃﾞﾙ:ｵﾌﾟｼｮﾝの構成により､高出力又は長いﾗﾝﾌﾟ寿命が得られます
Engineering |
Nominal Bulb Power |
4.75 W |
|
Source |
Long Lifetime Tungsten Halogen |
|
|
Typical Output Power |
4.5 mW |
|
|
Wavelength Range |
360nm - 2.4μm |
|
|
Color Temperature |
2,800 K |
|
|
Drift of Optical Output |
<0.3% per hour |
|
|
Pulse Power |
2,800 K |
|
|
Source Lifetime |
10,000 hours (typical) |
|
|
Stability of Light Source Output |
0.15% peak-to-peak |
|
|
Warm-up Time |
10 minutes |
|
Environmental |
Safety & Regulatory |
CE, ROHS, WEEE |
|
Operating Humidity Specification |
5-95% without condensation at 40 °C |
|
|
Operating Temperature |
5 °C – 35 °C |
|
Physical |
Fiber Connector |
SMA 905 |
|
Shutter |
Yes |
|
|
Cuvette Pathlength |
10 mm |
|
|
Dimensions |
6.2 cm x 6 cm x 15 cm |
|
|
Integrated Cuvette Holder |
No |
|
|
Integrated Filter Holder |
Yes |
|
|
Power Consumption |
up to 15 W |
|
|
Power Requirements |
12 VDC |
|
|
Trigger/Shutter Input Connection |
SUB-D-15 pin |
|
|
Trigger/Shutter Input Signal |
TTL; Up to 2.5 Hz maximum |
|
|
Weight |
0.5 kg |
| HL-2000-FHSA-LL | HL-2000-LL | HL-2000-HP | HL-2000-HP-FHSA | FLAME-DA-CUV-VIS-NIR | |
| Wavelength Range | 360nm - 2.4μm | 360nm - 2.4μm | 360nm - 2.4μm | 360nm - 2.4μm | 390nm - 900nm |
| Source | Long Lifetime Tungsten Halogen | Long Lifetime Tungsten Halogen | High-powered Tungsten Halogen | High-powered Tungsten Halogen | Tungsten-Halogen with a violet LED |
| Source Lifetime | 1000 hours (typical) | 1000 hours (typical) | 1000 hours (typical) | 1000 hours (typical) | 2000 hours tungsten 45000 hours LEDs |
| Nominal Bulb Power | 4.75 W | 4.75 W | 20 W | 20 W (tungsten halogen) | — |
| Typical Output Power | 4.5 mW | 4.7 mW | 8.8 mW | 8.4 mW | — |
| Safety & Regulatory | CE ROHS WEEE |
CE ROHS WEEE |
CE ROHS WEEE |
CE ROHS WEEE |
— |
| Shutter | Yes | No | No | Yes | — |
| Fiber Connector | SMA 905 | SMA 905 | SMA 905 | SMA 905 | — |
| Cuvette Pathlength | — | — | — | — | 10 mm |
| Dimensions | 58 x 59 x 140 mm | 58 x 59 x 140 mm | 58 x 59 x 140 mm | 58 x 59 x 140 mm | 88.9 x 35.6 x 34.4 mm (with feet) |
| Integrated Filter Holder | YES | NO | NO | YES | No |
| Weight | 0.5 kg | 0.5 kg |
0.5 kg |
0.5 kg | 180 g |
| Integrated Cuvette Holder | NO | NO | NO | NO | Yes |
| Power Requirements | 24 VDC | 12 VDC | 24 VDC | 24 VDC | 5V DC powered via Flame spectrometer over USB |
| Warm up Time | 10 minutes | 10 minutes | 10 minutes | 10 minutes | |
| Operating Temperature | 5 °C – 35 °C | 5 °C – 35 °C | 5 °C – 35 °C | 5 °C – 35 °C |
